Dxc d30 manual

By just pushing the EZ Focus button, the iris is automatically opened so that the depth of field is reduced to make critical focusing easier. At the same time, the electronic shutter is automatically set to obtain the correct light level. The EZ Focus function is overridden while recording.

This feature also makes it possible to manage the setup file data from personal computers with proper Sony protocol. In addition, the accuracy of the white balance adjustment is enhanced. These files are as follows. Hyper Gain is a convenient function for shooting under extremely low-light situations without using a lighting system. User Files can be easily made by modifying a Factory Preset File. Black Stretch emphasizes the contrast in the dark areas, while Black Compress enhances or deepens the darkness.

Almost all the parameters for camera operation and camera set-up can be stored into scene files, and the most suitable file for each shooting situation can be instantly recalled using the menu button on the RCP-TX7. The data can be stored on or recalled from the tape via the VF Menu System.

This function is called SetupLog. It is useful not only for the camera operator if there is a need to re-take the same shot, but also for checking the operating conditions during a particular shoot. Via this connector, the user can check the shooting conditions by displaying a color picture with characters superimposed on a connected external monitor.

The Pro pin Digital connector supplies bit component digital output, which allows expandability for unlimited applications and future digital interfacing, with a variety of devices. Its inner focus adjustment method and excellent performance will further expand acquisition applications of the cameras. Since the CCD is designed for the aspect ratio, with a capability to be switched to , high quality images can be obtained in the mode without any image loss.

High sensitivity of F11 at lx, K , remarkable signal to noise ratio of 63dB and a virtually invisible smear level of dB are achieved. In AUTO mode, viewfinder scanning size is automatically changed according to the camera aspect ratio or , as shown in A and B. In FULL mode, the image is displayed using the full size of the screen. As a result, the shape in the picture captured in FULL mode is not exactly the same as what it should be, but the use of the whole screen in FULL mode provides greater viewing comfort.

The large diameter eye cup not only provides greater comfort but also simplifies focusing. A wide range of diopter adjustments -3 to 0 is provided to compensate for differences in eyesight.

Selectable Preset White Balance The color temperature of the preset white balance can be switched to conventional K or K. This makes it possible for the DXC-D30WS to capture natural color reproduction even under a low color temperature lighting condition. The high quality picture of the DXC-D30 can be directly recorded onto the Betacam SP format - one of the best analog recording formats currently available in the professional field. The status information and data from the PVV-3, such as time code, recording audio level, remaining battery power, and remaining tape time can be superimposed on the viewfinder.

The following are the basic features of the DSR While maintaining the playback compatibility with the consumer DV recording format, higher picture quality is achieved by the wider track pitch of the DVCAM format. Its control button is located on the side panel of the DXC-D30 to afford easy access while shooting.

Freeze Mix Function When the camera operator needs to shoot a subject in the same framework as that of a previously recorded subject, it was very difficult to perfectly place the subject in the same position as the previous shot with conventional cameras.

With the DSR, a picture previously recorded on the DVCAM tape can be superimposed on the viewfinder screen, so that the camera operator can easily frame or position the subject just like a previous shot. ClipLink System s TAKE button s NG button The ClipLink system is a comprehensive shooting information and image management system necessary for the total digital production process, ranging from acquisition to editing.

The MARK button is useful, for example, if the program origination is based on a certain sequence. Logging of the CUE point is useful for shooting events where the shooting sequence is undetermined or very changeable.

Unless the NG button is pushed, OK status is automatically input. The combination of these two types of information is called ClipLink data. The ClipLink system eliminates the work of having to load all the shots on the tape to the EditStation System. Total views 1, On Slideshare 0. From embeds 0. Number of embeds Downloads 5. Shares 0. Comments 0. Likes 0.

You just clipped your first slide! Clipping is a handy way to collect important slides you want to go back to later. Now customize the name of a clipboard to store your clips. Visibility Others can see my Clipboard. Cancel Save. Exclusive 60 day trial to the world's largest digital library.

This manual contains the operation manual related to the operations of this equipment, the replacement of the parts and adjustments.

Related manuals In addition to this Service Manual Vol. Removal of Side Plate Cautions on Removal of Top Chassis Replacement of CCD Unit Connection Connector Equipment Required Switch Setting Before Adjustment Notes on Adjustment Adjustment Item Color Bar Signal Confirmation Sensitivity Measurement Confirmation Sub-Carrier Frequency Adjustment Carrier Balance Adjustment Y YC Level Adjustment Chroma YC Level Adjustment Pedestal Adjustment Shading Adjustment Flare Adjustment Character Position Adjustment Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference.

Danger of explosion if battery is incorrectly. Replace only with the same or equivalent type.